Vermont Castings 360DVSR Operations Instructions download pdf (Page 9)

Vermont Castings, Majestic Products, 360DVS Series

10002547

360DVS2/ 360DVS3/ 360DVSL/ 360DVSR

CERTIFIED TO

ANSI Z21.88b-1999/ CSA 2.33b-M99

Vented Gas Fireplace Heaters

Final Finishing

Input ratings are shown in BTU per hour and are

certified without deration for elevations up to

4,500 feet (1,370 m) above sea level.

For elevations above 4,500 feet (1,370 m) in USA,

installations must be in accordance with the

current ANSI Z223.1 and/or local codes having

jurisdiction.

In Canada, please consult provincial and/or local

authorities having jurisdiction for installations

above 4,500 feet (1,370 m).

When purging the gas lines, the window

frame assembly must be removed.

The gas pipeline can be brought in through the vent

end of the fireplace as well as the bottom. Knockouts

(to allow gas pipe installation and testing any gas

connection) are provided on the bottom behind the

valve. It is most convenient to bring the gas line in from

the vent end of the valve, as this allows fan installation

or removal without disconnecting the gas line.

The gas line connection can be made with properly

tinned

/8” copper tubing,

/8” rigid pipe, or an approved

flex connector. Since some municipalities have

additional local codes, it is always best to consult your

local authority and the CSA-B149.1 installation codes.

For USA installations, consult the current National Fuel

Gas Code, ANSI Z223.1.

Always check for gas leaks with a mild

soap and water solution. Do not use an

open flame for leak testing.

Gas Line Installation

Noncombustible materials such as brick or tile may be

extended over the edges of the face of the appliance.

DO NOT cover any vent or grille panels.

If a Trim Kit is going to be installed on the fireplace, the

brick or tile will have to be installed flush with the

edges of the appliance.

1. Choose the unit location.

2. Place the unit into position and secure it to the floor

with 1.5” (38 mm) screws or nails. Holes to secure

the unit to the floor are located behind the access

door grille on the left and right sides of the unit.

3. Frame in the fireplace with a header across the top.

It is important to allow for the finished wall face

when setting the depth of the frame.

4. Drywall (sheetrock) or wood material may be placed

with a zero clearance to the top edges of the

appliance when finishing walls above sides of the

appliance with glass windows. NOTE:

Attach wall

finishing to constructed frame, not the appliance.

5. On 360DVSL and 360DVSR, drywall, wood, or

wood molding may be placed with zero clearance

to the rear wall of the unit, along the vertical edge

formed by the standoffs, to intersection of the rear

wall, to the side wall having the small glass window.

NOTE:

Attach wall finishing to constructed

frame, not the appliance.

Framing & Finishing

FP297a

1/2” GAS SUPPLY

1/2” NPT x 1/2” FLARE

SHUT-OFF VALVE

3/8” FLEX LINE

(FROM VALVE)

Fig. 5 Gas shutoff valve and flex connector

Gas Inlet & Manifold Pressures

Natural LP (Propane)

Inlet Minimum 4.5” wc 11” wc

Inlet Maximum 14” wc 14” wc

Manifold Pressure 3.5” wc 10” wc

Max. Max.

Input Input

Model Fuel Gas Control BTU/h BTU/h

360DVS2RN Nat Millivolt 38,000 26,600

360DVS2RP Prop Millivolt 38,000 28,500

360DVS2EN Nat 24V Hi/Lo 38,000 26,600

360DVS2EP Prop 24V Hi/Lo 38,000 28,500

360DVS3RN Nat Millivolt 38,000 26,600

360DVS3RP Prop Millivolt 38,000 28,500

360DVS3EN Nat 24V Hi/Lo 38,000 26,600

360DVS3EP Prop 24V Hi/Lo 38,000 28,500

360DVSLRN Nat Millivolt 38,000 26,600

360DVSLRP Prop Millivolt 38,000 28,500

360DVSLEN Nat 24V Hi/Lo 38,000 26,600

360DVSLEP Prop 24V Hi/Lo 38,000 28,500

360DVSRRN Nat Millivolt 38,000 26,600

360DVSRRP Prop Millivolt 38,000 28,500

360DVSREN Nat 24V Hi/Lo 38,000 26,600

360DVSREP Prop 24V Hi/Lo 38,000 28,500

Gas Specifications

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 38 39

Comments to this Manuals

No comments

Vermont Castings 360DVSR Operations Instructions Page 9

Comments to this Manuals

Related products and manuals for Fireplaces Vermont Castings 360DVSR