Vermont Castings 360DVSR Operations Instructions download pdf (Page 38)

Vermont Castings, Majestic Products, 360DVS Series

10002547

Trim - bottom

Trim - top

Trim Window Top/Bottom

Screws

Top trim piece

Top deflector plate

Trim-left

Trim-right

Method B

For instruction on wiring the EB-1 Electrical Junction

Box, see section EB-1 Electrical Junction Box

Connection on page 10.

Remote Controls

Method A (Not using EB-1; see Fig. 51)

1. Connect the ground wire to the power supply line to

ground stud located on the base of the firebox.

2. Connect the black wire of the supply line to either

terminal of the speed control unit.

3. The second terminal of the speed control unit is

attached to either terminal of the thermal sensor.

4. The second terminal of the thermal sensor is

connected to either terminal of the fan motor.

5. The second fan motor terminal is connected to the

white wire of the supply line.

Optional remote control units are available to control

different functions of the appliance.

MODEL FUNCTION(S) CONTROLLED

MRC1 ON/OFF

MRC2 ON/OFF & Temperature

MRC3 ON/OFF & Temperature control with a

digital display and a programmable

24-hour clock

IMT Wall-mounted thermostat control

Decorative Trim Frame Kit

4. Using the screws provided, attach the lower trim

piece to the predrilled holes in the lower edge of the

bottom louvre opening.

5. Using the screws provided, attach the two side trim

pieces to the predrilled holes in the vertical side

frames.

6. Use the top deflector plate and the screws removed

in step 3 to clamp the top trim piece in place. With

the trim piece in place along the top edge, refit and

secure the top deflector plate.

7. Reattach the lower louvre panel to the hinges and

replace the top louvre assembly.

All protective plastic wrap must be

removed from the trim pieces before the

appliance is put into service. If plastic

wrap is not removed, a health or fire

hazard may develop.

Black

White

Ground

A: SPEED CONTROL

B: TEMPERATURE SENSOR

C: FAN

CFM105

DV360TKMP

Fig. 51 ‘Method A’ fan wiring diagram

The DV360TKMP Medium Trim Kit in polished brass is

available for the 360DVS2 model only.

Each kit contains 4 polished brass trim pieces and the

necessary attaching screws to frame one side window

of the unit.

Installation (Refer to Fig. 52.)

1. Remove the top louvre assembly.

2. Lower the bottom louvre assembly to expose the

louvre hinges. Unscrew the retaining screws and

remove the louvre assembly from the hinges.

3. Remove the retaining screws that secure the top

deflector plate (above the top louvre opening), and

remove the plate.

Fig. 52 Decorative trim frame installation

1 2 ... 33 34 35 36 37 38 39

Comments to this Manuals

No comments

Vermont Castings 360DVSR Operations Instructions Page 38

Comments to this Manuals

Related products and manuals for Fireplaces Vermont Castings 360DVSR