Vermont Castings 360DVSR Operations Instructions Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 39
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
24
Vermont Castings, Majestic Products, 360DVS Series
10002547
Only glass approved by Vermont
Castings, Majestic Products should be
used on this fireplace.
The use of any nonapproved replacement glass will
void all product warranties.
Care must be taken to avoid breakage of the glass.
Under no circumstances should this appliance be
operated without the front glass in place, or with the
glass in a damaged condition.
Replacement glass (complete with gasket) is
available through your Vermont Castings, Majestic
Products dealer and should only be installed by a
licensed qualified service person.
The top side and top end louvres are removed by
simply lifting the louvre assembly and pulling the
assembly away from the fireplace (Fig. 37).
The lower side louvres are hinged along there
lower edge and are folded down for access to
components in the base cavity of the fireplace.
The lower end louvre assembly on the 360DV
S3/ SL/ SR units is removed in the same manner
as the top louvre assemblies.
Side Window Frame Assemblies
1. Shut off the gas supply.
2. Allow the fireplace to cool if it has been in
operation.
3. Remove the top louvre assembly.
4. Lower the bottom louvre assembly.
5. Release the two clamps along lower edge of the
frame by pulling down on clamp handles (Fig. 38).
6. Tilt lower edge of frame out slightly and lift window
frame assembly up and away from the fireplace.
7. To reinstall the window frame assembly reverse
thisprocedure.
End Window Frame Assembly
1. Remove the top and bottom louvre assembly.
2. Remove the lower window trim (held in place with
magnets).
3. Remove both lower retaining screws. Access to
these screws is gained through the holes along the
lower edge of the frame behind the trim (Fig. 39).
4. Tilt lower edge of frame out slightly and lift window
frame assembly up and away from the fireplace.
5. To reinstall the window frame assembly reverse
the process.
Operating Instructions
Glass Information
Window Frame Removal
Louvre Removal
Louvre removal
GLASS
PANEL
LOUVRE
1.
2.
Window
Frame
Assembly
Push
clamp handle
Lower clamps
Window
Frame
Assembly
Pull clamp
hook
Fig. 37 Remove louvre assembly top
Fig. 38 Window frame assembly removal
Locations of lower
retaining screws
Fig. 39 Retaining screw
Removable_side
Remove_end
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 38 39

Comments to this Manuals

No comments