Vermont Castings DV360 Operations Instructions download pdf (Page 9)

DV360/580 Series Direct Vent Gas Fireplace

20010667

Alternate Switch Location

The remote switch can be installed on either side of

the access door. Mount the switch to the switch bracket

provided. Screw the bracket on either side of the frame,

line up the screws with the prepunched holes. (Fig. 8)

FP1024

alternate

remote switch

location

1/27/00 djt

FP1024

Fig. 8 Alternate switch location.

EB-1 Electrical Box

The ﬁreplace, when installed, must be

electrically connected and grounded in

accordance with local codes or, in the ab-

sence of local codes, with the current CSA

C22.1 Canadian Electrical Code.

For USA installations, follow the local

codes and the national Electrical Code

ANSI/NFPA No. 70.

It is strongly suggested that the wiring of

the EB-1 Electrical Junction Box be carried

out by a licensed electrician.

Ensure that the power to the supply line

has been disconnected before commenc-

ing this procedure.

The EB-1 electrical junction box has been

supplied standard on the DV360/580 models to allow

for the easy installation of an optional fan kit.

To connect the EB-1 box to the house electrical supply,

follow the steps below.

1. Unscrew the retaining screw from the EB-1 base

plate (Fig. 9) and remove the EB-1 assembly from

the ﬁreplace.

2. Remove the front cover of the EB-1 box.

3. Remove the plug socket assembly from the EB-1

box.

4. Feed the supply line in from the outside through the

cable clamp. (Fig. 9)

5. Connect black wire of the power supply line to the

brass screw (polarized) of the socket assembly.

6. Connect the white wire of the power line to the

chrome screw of the socket assembly.

FP580

INSTA VENT FREE

EB1 JUNCTION BOX

11/18/97

OUTSIDE

Electrical Box

FRONT OF UNIT

INSIDE

FRONT OF UNIT

FP580

Fig. 9 EB-1 receptacle.

7. Connect the ground wire of the supply line to the

green screw of the socket assembly.

8. Reﬁt the socket assembly back into the electrical

box and replace the cover plate. Secure the cable

with the clamp on the outside of the unit to prevent

strain on the connections.

9. The EB-1 electrical junction box is now ready to sup

ply power to the FK12 or FK24 fan kits if ﬁtted.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

Comments to this Manuals

No comments

Vermont Castings DV360 Operations Instructions Page 9

Comments to this Manuals

Related products and manuals for Fireplaces Vermont Castings DV360