Vermont Castings DV360 Operations Instructions download pdf (Page 26)

DV360/580 Series Direct Vent Gas Fireplace

20010667

DV360

H100a

hearth Panels

1/27/00 djt

Screw

Burner

Hearth Panels

Grate

Front of Unit

H100a

Screw

Fig. 48 Hearth panel location (if provided).

Installation of Logs

Remove front glass. (Refer to “Window Frame As-

sembly Removal” Section, Fig. 47) Remove logs from

packaging.

As with all plastics — these are not toys

and should be kept away from children

and infants.

Log Identiﬁcation Chart

Logs DV360 DV580

Log Front Left 20010673 E9

Log Front Right 20010672 E10

Log Rear 20010675 E8

Log Top Left -- E12

Log Top Right 20010676 E13

Log Front Center -- E11

Log Top Center 20010677 --

Log Overlay 20010674 --

NOTE: Refer to Figure 49 for bracket and bend loca-

tions.

1. Place the log front right. Hold the log with the pointed

end toward the left. Place on top of burner toward

the right. Slide the log toward the front until it comes

in contact with the bracket at the front of the burner

housing behind the burner tube. (Fig. 49) Adjust the

log until the pointed end on the left is aligned with

the left edge of the bracket. (Fig. 50) NOTE: Gently

push down on the right rear of the log so the pilot

front shield cuts slightly into the log. This will help to

ensure proper log position.







Log Front Right

LG477

Figure 50

Front Brackets







Stop

Bracket

Rear Log

Bracket

Pilot

Bracket

Bend

Front Left

Bend

Front

Brackets

FP1653

Fig. 49 Burner brackets and bends.

Left Edge

of Bracket

Pilot Front

Shield

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Comments to this Manuals

No comments

Vermont Castings DV360 Operations Instructions Page 26

Comments to this Manuals

Related products and manuals for Fireplaces Vermont Castings DV360