Vermont Castings WEF36 Operations Instructions download pdf (Page 14)

68D5301

• Replacing Transformer

1. Follow Steps 1 through 3 in 'Replacing Heater/Blower'.

2. Disconnect transformer wires from control board.

3. Remove screws and nuts from rebox surround to remove

transformer. Figure 17

4. Remove and discard transformer.

5. Place new transformer against inside of rebox surround and

replace screws and nuts removed in Step 3.

6. Reconnect transformer wires to control board. Refer to Wiring

Diagram, Figure 15 or 16.

7. Replace glass with brackets, and top panel.

8. Replace trim.

• Replacing Main Control Board

1. Follow Steps 1 through 3 in 'Replacing Heater/Blower'.

2. Disconnect wires to main control board.

3. Squeeze top of standoffs to remove main control board and discard.

4. Gently push new control board onto standoffs to install.

5. Reconnect wires to main control board. Refer to Wiring Diagram,

Figure 15 or 16.

6. Replace glass with brackets and top panel.

7. Replace trim.

• Replacing Backlight LED Strip

1. Follow Steps 1 and 3 in 'Replacing Heater/Blower'.

2. Disconnect wires from main control board.

3. Squeeze top of standoffs to remove backlight LED strip and discard.

4. Place new backlight LED strip onto standoffs and push gently.

5. Connect wires to main control board. Refer to Wiring Diagram, Figure 15

or 16.

6. Replace glass with brackets and top panel.

• Replacing Settings Control Board

1. Follow Steps 1 through 3 in 'Replacing Heater/Blower'.

2. Disconnect wires from main control board.

3. Remove screws from bracket to remove settings control board.

4. Place new settings control board into position making sure each control

is aligned with slot in panel. Install using screws from Step 3. DO NOT

overtighten. This will damage control board.

5. Reconnect wires to main control board. Refer to Wiring Diagram, Figure

15 or 16.

6. Replace glass with brackets and top panel.

7. Replace trim.

FP2400

remove transformer

Transformer

Nuts

Screws

FP2400

Figure 17

FP2401

remove control board

Transformer

Main Control

Board

Standoffs

FP2401

Figure 18

FP2402

replace backlight LED

Backlight

LED Strip

Standoffs

Figure 19

FP2402

FP2403

replace settings cb

Screws

Settings

Control

Board

FP2403

Figure 20

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Vermont Castings WEF36 Operations Instructions Page 14

Comments to this Manuals

Related products and manuals for Fireplaces Vermont Castings WEF36