Vermont Castings Resolute Specifications download pdf (Page 17)

Resolute

Acclaim Woodburning Stove

2000893





The , located beneath the

ashlip, regulates how much heat the stove produces by

controlling the amount of air received by the re. The

more air supplied, the hotter the re. (Fig. 27)

With a travel range of about 6” (159 mm), the air con-

trol is closed when the lever is fully left. Maximum heat

is produced when the lever is fully right. It may also be

set anywhere between a “start-up” position and the high

and low extremes to achieve a desired heat output. A

directional arrow cast into the Acclaim’s ash lip serves



as a reminder of the correct “open” and “closed” posi-

tions.

The  is located on the right side of the

stove and controls air ow within the stove. (Fig. 27)

The damper is open when the handle is toward the rear

of the stove, and the combustion gases exit directly out

the ue collar. When the handle is pulled forward and

locked, the damper is closed, secondary combustion

occurs, and the stove operates most efciently.

The damper must be fully open or fully closed. There

are no intermediate positions for the damper handle.

You will need the following tools to assemble the Ac-

claim:

• 9/16” open end wrench • safety glasses & gloves

• at head screwdriver • power drill w/ 1/8” (3mm) bit

• stub handle phillips screwdriver



1. Remove the shipping straps and plastic wrap.

2. Inspect the stove and contents for shipping damage

or missing parts. Immediately notify your dealer of

any damage. Do not install this stove if any damage

is evident or any parts are missing.



• Stove Legs, 4

• 3/8-16 x 1¹⁄₄” hex head Leg Bolts with washers, 4

• Owner's Registration Card

• Touch-up Paint (Porcelain enamel stoves)



Remove and discard the four large slot-head screws

from the stove bottom. Install the stove legs using the

hex head bolts from the parts bag. (Fig. 26a) Use 3/8”

washers with all four legs. Tighten the bolts rmly.

Overtightening can strip tapped threads.

ST466

Seville

Attach legs

Leg Bolt and

Washer

Leg Leveller

ST466

 Attach stove legs and leg levellers.





Convenient top-loading of wood through the Acclaim’s

stovetop griddle supplements traditonal replace-style

loading through the front door.

The griddle simply lifts to open.

The front door employs a rotating cam and a door latch

tab to secure it. The handle points down when the door

is closed.

To open the front door, pull on the handle to release the

cam. To close it, push the door until the latch engages.

Double-check the latch by pushing lightly on the handle.

When the latch is properly secured, the door will remain

closed.

For clear re viewing, the front door features a large,

self-cleaning glass panel. The front door may be

opened (or even removed) and the optional spark

screen clipped in place for open-re viewing as well.

ST611

Res Acclaim

controls

10/1/02 djt

Flue Collar

Top Load Door/Griddle

Damper Handle

(not shown)

Griddle Handle

Glass Panel

Front Door

Primary Air Control

Front Door Handle

ST611

 The Resolute Acclaim controls are conveniently

located and easy to use.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Comments to this Manuals

No comments

Vermont Castings Resolute Specifications Page 17

Comments to this Manuals

Related products and manuals for Stoves Vermont Castings Resolute