Vermont Castings RHE32 Operations Instructions download pdf (Page 22)

10000801

Vermont Castings, Majestic Products RHEDV Direct Vent Insert

Optional Accessories

Remote Controls

Optional remote control units are available to control

different functions of the appliance.

Model Function(s) Controlled

MRC1 ON/OFF

MRC2 ON/OFF and Temperature

MRC3 ON/OFF and Temperature control

with a digital and a programmable

24 hour clock

IMT Wall mounted thermostat control

A Trim Options for RHEDV25

A1 RHE25SSP, HE25LP Trims

For use with RHEDV25

RHE25SSP Small surround, black with thin polished

brass edge

HE25LP Large polished brass edge (to be used

with RHE25SSP)

Trim Assembly

RHE25SSP

1. Install trim channels (left and right sides). Use two

screws to assemble each piece.

2. Slide on the trim top channel and fasten it from the

back side.

3. Install the trim top deflector using two screws.

4. Remove ALL plastic protective covering from brass

trim.

Trim Top Deflector

Trim Frame Top

Section

Side View

FP1261a

Fig. 27 Trim top deflector.

HE25LP

1. To install the kit you do not have to remove any

piece of brass, you just add the external pieces.

2. Remove the frame trim from the unit if it is already

installed.

3. Install trim channels (left and right sides) by remov-

ing the two screws that hold the side brass trim and

put them back to hold both parts.

4. Slide on the trim top channel and fasten it from the

back side.

5. Remove the two screws that hold the top brass trim.

6. Install the two brackets to the studs in the bottom of

the top channel. Use the nuts supplied with top trim

channel.

A flat louvre kit OR a bay window kit need

to be chosen to complete the installation.

Zero Clearance Kit

For installations other than in existing woodburning

fireplaces such as new construction or renovation

projects, a Zero Clearance Kit must be used. The

HEZC enables these inserts to be installed in combusti-

ble environments. It is recommended that an Air Kit

(AKZC) be installed whenever using a Zero Clearance

Kit. Consideration must be given to the dimensions of

the Zero Clearance Kit and the requirements of the Air

Kit when planning out the installation.

Follow the instructions supplied with the Zero Clear-

ance Kit carefully for proper installation.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 37 38

Comments to this Manuals

No comments

Vermont Castings RHE32 Operations Instructions Page 22

Comments to this Manuals

Related products and manuals for Fireplaces Vermont Castings RHE32